Rexroth HED1OA THROTTLE VALVE

B:24 mm; D1:284 mm; r1,2 min.:2.1 mm; Mass housing washer:9.21 kg; D:380 mm;

Basic dynamic load rating C:475 kN; Reference speed:560 r/min; r1,2 min.:3 mm; d:600 mm; Limiting speed:800 r/min; Mass bearing (including seat washer where applicable):48 kg; Fatigue load limit Pu:49 kN; d1 ≈:706 mm; Da max.:647 mm; D1 ≈:604 mm;

Initial grease fill:141.75 g; RG:3/8 NPT; Cap bolt recommended tightening torque:203.4 N·m; P120°:38.3 kN; P180°:42.3 kN; J1:53.975 mm; Pa:14.1 kN; ba:47.625 mm; H2:47.625 mm; R1:60.325 mm;

Sealed Speed Rating n3:4900 rpm; D:100.0000 mm; B:25.00 mm; Basic Static Radial Load Rating Co:31000 N; d:35.000 mm; Basic Dynamic Radial Load Rating C:55300 N; Accessories:Shield & Seal; Fillet Radius ra:1.50 mm; Grease Speed Rating Open/Shielded n1:7000 rpm; Oil Speed Rating Open/Shielded n2:8500

A2:379.425 mm; P180°:267 kN; Housing:SSAFS 640; PG:1/4 NPT; Bearing:22340 CCK/W33; H1:250.825 mm; R2:50.8 mm; P150°:222 kN; Cap bolt, SAE grade:8; H2:101.6 mm;

a:31 mm; D:47 mm; Pu:0.682 kN; Da:42 max; Bearing designation:3204  ; d:20  ; d:20 mm; Oil:11 000 min-1; da:25 min; Static (Cor):15.000 kN;

Basic dynamic load rating C:4500 kN; Lubricant:Maintenance free &nd; dk:470 mm; Material constant KM:1055; da max.:429 mm; b1:21 mm; rb max.:4 mm; Design (sliding contact surface combination):Steel/PTFE FRP; α:3 °; Specific static load factor K0:120 N/mm²;

Fillet Radius ra:2.50 mm; Grease Speed Rating n1:3000 rpm; Basic Dynamic Radial Load Rating C:140000 N; D:180.0000 mm; Oil Speed Rating n2:3600 rpm; B:60.00 mm; Basic Static Radial Load Rating Co:51000 N; d:85.000 mm;

Fw:47 mm; Basic static load rating C0:83 kN; Limiting speed:10000 r/min; Fatigue load limit Pu:10.2 kN; Mass needle roller and cage assembly:0.051 kg; U:27 mm; Basic dynamic load rating C:33.6 kN; Reference speed:9000 r/min; Ew:52 mm;

A2:307.975 mm; End plug (suffix Y):EPR 18; H2:69.85 mm; P120°:85.9 kN; RG:3/4 NPT; P180°:92.5 kN; J max.:549.275 mm; ba:74.612 mm; J min.:492.125 mm; Max. speed for Taconite seal:520 r/min;

d1:17 mm; d2:25 mm; B:1 mm; M:10.5 mm; f:3 mm; Mass lock washer:0.002 kg; d:12 mm;

D:160 mm; Basic dynamic load rating C:655 kN; Specific dynamic load factor K:100 N/mm²; d:110 mm; Mass plain bearing:4.8 kg; r2 min.:1 mm; M:5 mm; Sealing solution:Triple-lip seals; Da max.:153 mm; ra max.:1 mm;

d:90.000 mm; Basic Radial Load Rating-Dynamic DC:133000 N; Width - Outer Ring B0:43.0 mm; Width - Inner Ring B1:73.03 mm; D:190.0000 mm; Fillet Radius ra:2.50 mm; Basic Radial Load Rating-Static SCO:98000 N; Speed Rating-Open and Shielded-Oil OSO:4000 rpm; Accessories:300SWI Non-Filling N; Diameter

Lock nut:N 09; B1:39.98 mm; Mass adapter sleeve assembly:0.28 kg; d1:36.513 mm; B4:12.598 mm; B:11.379 mm; Threads per inch:18; d3 max.:64.414 mm; d:45 mm; G:44.882 mm;

h:36.513 mm; R2:22.225 mm; PG:1/8 NPT; db:100.013 mm; Stabilizing ring:2 x SR-1517; Housing:FSAF 217; A2:127 mm; J1:53.975 mm; Da:149.873 mm; Lock washer:W 17;