Yuken SRCT-03--50 pressure valve

D:110.0000 mm; Oil Speed Rating n2:5600 rpm; Basic Static Radial Load Rating Co:965000 N; Fillet Radius rb:1.00 mm; Grease Speed Rating n1:4800 rpm; d:60.000 mm; Fillet Radius ra:1.50 mm; Basic Dynamic Radial Load Rating C:95600 N; B:44.00 mm;

Fw:158 mm; Calculation factor kr:0.15; Mass bearing:2.92 kg; Basic static load rating C0:255 kN; Fatigue load limit Pu:28 kN; C:33 mm; Limiting value e:0.2; Basic dynamic load rating C:179 kN; r1,2 min.:2 mm; Limiting speed:5300 r/min;

Fillet Radius rb:0.60 mm; Grease Speed Rating n1:5600 rpm; Oil Speed Rating n2:7500 rpm; D:80.0000 mm; Basic Dynamic Radial Load Rating C:52700 N; Fillet Radius ra:1.00 mm; Basic Static Radial Load Rating Co:45000 N; d:40.000 mm; B:36.00 mm;

Fillet Radius ra:3.00 mm; Speed Rating-Open and Shielded-Grease OSG:5300 rpm; Basic Radial Load Rating-Dynamic DC:296000 N; B:58.00 mm; d:130.000 mm; Basic Radial Load Rating-Static SCO:345000 N; Speed Rating-Open and Shielded-Oil OSO:7800 rpm; D:280.0000 mm; Fillet Radius rb:1.00 mm; Type:300-RDM S

Fillet Radius ra:1.50 mm; B:38.10 mm; Accessories:Two Seals & Snap-Rin; Sealed Speed Rating n3:4300 rpm; D:110.0000 mm; Basic Dynamic Radial Load Rating C:78100 N; d:60.000 mm; Oil Speed Rating n2:5000 rpm; Basic Static Radial Load Rating Co:88000 N; Grease Speed Rating n1:3800 rpm;

Hydraulic nut:HMVC 28E; B:24.079 mm; Sleeve:S 128x4.13/16; d3 max.:180.315 mm; B1:134.95 mm; Mass adapter sleeve assembly:5.9 kg; Lock washer:W 28; Threads per inch:12; d1:122.237 mm; Lock nut:AN 28;

B2 ≈:363 mm; Calculation factor Y2:2.7; Basic static load rating C0:15600 kN; D1 ≈:678 mm; Calculation factor Y0:1.8; Calculation factor e:0.37; d2 ≈:564 mm; Fatigue load limit Pu:1040 kN; b:22.3 mm; d1:460 mm;

l:12 mm; rc max.:1 mm; a:167.026 mm; K:4.5 mm; r5 min.:1 mm; D:360 mm; d:240 mm; Basic dynamic load rating C:1695 kN; Db min.:346 mm; Basic static load rating C0:3550 kN;

L:511.175 mm; Max. speed for Taconite seal:520 r/min; Bearing:23034 CCK/W33; RG:3/4 NPT; Cap bolt, SAE grade:8; Housing:SSAFS 034 KA; P90°:180 kN; H2:60.325 mm; Da:259.999 mm; h:44.45 mm;

s:1.4 mm; D:72 mm; d2 (max):48.3 mm; b:4 mm; B:17 mm; d2:35 mm; E:64 mm; b1:7 mm; Static (Coa):48.2 kN; Dynamic (Ca):51.1 kN;

Basic Static Radial Load Rating Co:2360 N; Grease Speed Rating Open/Shielded n1:26000 rpm; Fillet Radius ra:0.30 mm; D:28.0000 mm; B:8.00 mm; Basic Dynamic Radial Load Rating C:5070 N; Sealed Speed Rating n3:17000 rpm; Oil Speed Rating Open/Shielded n2:32000 rpm; Accessories:Shield & Seal; d:12.000

ra max.:0.6 mm; b:3.1 mm; Specific dynamic load factor K:150 N/mm²; C:18 mm; b1:3.1 mm; Basic dynamic load rating C:93 kN; Da min.:41.3 mm; dk:40.7 mm; rb max.:0.6 mm; r1 min.:0.6 mm;

D:62 mm; d:35 mm; Calculation factor f2D:1.09; Calculation factor f0:9.7; Attainable speed for grease lubrication:28000 r/min; Db max.:60 mm; Calculation factor f:1.06; Ball diameter Dw:7.938 mm; Static axial stiffness, preload class D:100 N/µm; Preload class A GA:60 N;

Basic dynamic load rating C:1600 kN; Da max.:202.5 mm; Da min.:180 mm; Specific static load factor K0:500 N/mm²; Design (sliding contact surface combination):Steel/steel; Specific dynamic load factor K:150 N/mm²; r2 min.:1 mm; ra max.:1 mm; dk:180 mm; B:90 mm;

D:460 mm; d1:280 mm; r1,2 min.:4 mm; Basic static load rating C0:4900 kN; da max.:362 mm; Da max.:445 mm; ra max.:3 mm; Ca min.:2.8 mm; Operating clearance factor k2:0.106; da min.:307 mm;